Aluminum honeycomb panels, suitable for civil construction, travel and other decoration. Is the application of aviation and aerospace materials in civil construction. The whole process of processing all in the modern factory to complete, the use of hot forming technology, due to aluminum and honeycomb between the high thermal conductivity, both inside and outside the aluminum thermal expansion and contraction synchronization; honeycomb on the aluminum hole, so that the plate can be free Flow; slidable mounting buckle system in the thermal expansion and contraction will not cause structural deformation.
The main plate selection of high-quality 3003H24 alloy aluminum or 5052AH14 high manganese alloy aluminum substrate for the substrate thickness of 0.8 ~ 1.5mm fluorocarbon roller or color-resistant paint, color-resistant paint in the anti-scratch, acid rain corrosion discoloration, since Cleanliness is stronger than PVDF, the bottom plate thickness is 0.6 ~ 1.0mm, the total thickness is 25mm.
Core material with hexagonal 3003 aluminum honeycomb core, aluminum foil thickness 0.04 ~ 0.06mm, side length 5 ~ 6mm, the use of roll forming technology is completed, the back of the skin forming, automatic machine equipment, Tightly bite. The whole process of processing all in the modern factory to complete, the use of hot forming technology, due to aluminum and honeycomb between the high thermal conductivity, both inside and outside the aluminum thermal expansion and contraction synchronization; honeycomb on the aluminum hole, so that the plate can be free Flow; Sliding mounting buckle system in the thermal expansion and contraction does not cause structural deformation, it can guarantee a high degree of flatness. Adhesive: two-component polyurethane high-temperature curing adhesive, with automatic honeycomb composite production equipment by adding Pressure high temperature compound, to overcome the previous honeycomb board adhesive layer of the brittle problem. The inner layer is a specially made hexagonal aluminum honeycomb, made of aluminum alloy with hardness of H19, and is used as a core plate adhered to the sandwich structure to withstand the pressure in tangential direction. These intertwined dense honeycomb like many small I-beam, can be decentralized from the direction of the pressure from the panel, so that the plate evenly to ensure that the panel in a large area can still maintain a high degree of flatness.
Installation with both sides of the installation, no mechanical damage. Sliding mounting buckle system allows thermal expansion and contraction, and the end of the plate will only control the expansion direction of the plate. 25MM hidden seam system beautiful and self-cleaning function. After the completion of the production of the box-type honeycomb panels, the inner and outer panels and honeycomb structure to form a whole In addition, the hollow honeycomb can greatly weaken the thermal expansion of the board.